Raw Material Bins Module #30543
The Raw Material Bins Module consists of two raw material bins, and a 60mm
wide conveyor belt with an infrared sensor at the end. The raw material
bins store four blocks each. Each bin has an infrared sensor that will detect
when the bin is empty. A part ram, when actived, will push the block out
of the raw material bin onto the conveyor belt. The part moves down the
conveyor belt, where it is detected by the infrared sensor before it leaves
the module. This can be the first module in a complete factory simulation.
This module will connect with any other module in the Tim King Electronc
Inc. Moduler Model System.
Features:
- two raw material bins
- independent part ram for each bin
- infrared sensors for empty bin detection
- infrared sensor for detection of a part leaving the module
- four green blocks
- four blue block with magnetic inserts for color block detection
- compatible with any 24vdc 16 input/output plc system with optional interface board
- ladder logic for Allen Bradley SLC-500
- can be combined with other Tim King Electronics Inc. Modules System Models®
Technical Data
data inputs
- 4 limit switchs
- 3 infrared sensors
control output:
- 2 reversible motors
- 1 nonreversing motor
Back to modular model list
tking101@comcast.net