Finished Goods Bins Module #30549
The Finished Goods Bins Module contains a 60 mm wide convoyer belt, with
two independent part bins. An infrared sensor at the start of the conveyor
belt detects if a part is entering the system. A magnetic switch, will distinguish
between a blue or green part. The part is then moved to the proper storage
bin, where a overhead ram is activated, moving the part into the bin. Bad
parts can exit off the end of the conveyor belt. This module is intended
to be the last module in a factory simulation.
Features:
- infrared sensor detects when a part enters the module
- two independent part bins
- magnetic switch detects the difference between blue and green parts (blue parts have magnets)
- compatible with any 24vdc 16 input/output PLC system with optional interface board
- compatible with any Tim King Electronics Inc. Module Model System®
- ladder logic for Allen Bradley SLC-500 System
Technical Data:
data inputs:
- 5 limit switches
- 1 infrared sensor
- 1 magnet sensor
control outputs:
- 2 reversible motors
- 1 nonreversing motor
Back to modular model list
tking101@comcast.net