Conveyor Belt Turn Around Module #30550
The Conveyor Belt Turn Around Module contains three 60mm wide conveyor belts
in a "U" shape. Each conveyor is driven by a separate motor. Infrared
sensors are located at the start, and at the end of the conveyor system.
The start sensor turns on all three conveyor belts and the end sensors turns
the conveyor belts after a short time delay. Smart TTL logic is used to
control the module. No controller, or software is needed. Use the Conveyor
Belt Turn Around Module for a complete factory of up to seven feet long
using other standard Tim King Electronics Inc. Module Model System.
Note: This model can be custom made to order to any size.
Features:
- infrared sensors detect when the part enters and leaves the module
- three independent conveyor belts
- 60mm wide conveyor belts
- smart TTL logic, no controller needed
- 12VDC power pack
- compatible with any other Tim King Electronics Inc. Module Model System®
Technical Data
data inputs:
- 1 on/off switch
- 2 infrared sensors
control outputs:
- 3 nonreversing motors
- 1 smart TTL Logic Controller with 12VDC power pack
Back to modular model list
tking101@comcast.net